Welcome to Shenzhen Tongcheng Automation Equipment Co., Ltd. official website!
High speed manipulator

News classification

Contact us

Shenzhen Tongcheng automation equipment Co., Ltd.
Q       Q : 443231019
Phone   : 0755-33199429
Mailbox : 13692211190@163.com
Web site: www.toolcen.com
Factory address: Shenzhen Baoan District Shiyan Street Bay Village Yue Chang Industrial Park
Office address  : room 13, 12 floor, 232 stone East Road, Shiyan street, Baoan District, Shenzhen

How to avoid the damage of the CNC lathe manipulator?

Your current position: Home >> News >> Company news

How to avoid the damage of the CNC lathe manipulator?

Release date:2017-08-22 Author: Click:

How to avoid the damage of the CNC lathe manipulator?

1, the most basic is the correct installation of CNC machine tools. For the installation of CNC machine tools, people should pay more attention to it. It is necessary to ensure that the installation of all components is in place. The incorrect installation not only affects the beauty, but also causes the failure in the process of use, and the service life will be greatly reduced.

2. We should look with our eyes and listen to the ears. Checking and listening to some signs of wear or need to adjust can greatly help to maintain the best operating state of the manipulator.

3, after running for a period of time, the manipulator of the CNC lathe must be stopped to release the heat generated by the manipulator of the numerical control lathe, so as to achieve the goal of the life of the manipulator.

Lnjection manipulator    Lnjection manipulator

4. If it is in this kind of surface and wet environment for a long time, the lathe manipulator made of iron is very easy to breed the rusty environment. CNC lathe manipulator rusty in appearance not only greatly reduced, but also pollute the manipulator products, affects the working quality of the manipulator lathe. Therefore, it is necessary to use a lathe manipulator in a relatively dry environment and to dry the lathe manipulator regularly.

5, the cleaning work is carried out regularly to keep the guide rail and bearing clean and good lubricity at all axes.

6. In high speed operation, the vibration frequency may be very high. It is best to install the manipulator on the support structure independent of the molding equipment.

7, ensure the safety of the wiring and belt and the reasonable installation of the cable.

8, we should always refer to the manual manual for rational lubrication of metal parts.

This article URL:http://en.toolcen.com/news/365.html

Related tags:Lnjectionmanipulator

最近浏览:

Contact us

Contact us

Tongcheng automation equipment Co., Ltd.
Q       Q : 443231019Lnjection manipulatorPhone   : 0755-33199429
Mailbox : 13692211190@163.com
Web site: www.toolcen.com
Factory address: Shenzhen Baoan District Shiyan

                             Street Bay Village Yue Chang Industrial Park
Office address  : room 13, 12 floor, 232 stone East Road, Shiyan street, Baoan District, Shenzhen

Share
Welcome to leave a message
Please enter a message here, we will contact you as soon as possible.
Name
Contact
Phone
Phone
Mailbox
Mailbox
Address
Address