cn.png

High speed manipulator

News classification

Products

Contact

Shenzhen Tongcheng Automation Equipment Co., Ltd

QQ:443231019

Phone:0755-33199429

Cell phone:13823266293  Mr.Rao

                  18128639712  Mr.Chen 

Email:

472233169@qq.com    Mr.Rao

1249785244@qq.com  Mr.Chen 

Ministry of Foreign Trade:

Lily  Mob/Wechat/WhatsAPP

/Facebook/X : +86 18772968620 

Email : 2413092183@qq.com

Website:www.toolcen.com

Factory Address: No.4 Rongzhong Road, Chencun Community, Humen Town, Dongguan City, Guangdong Province, China.


Fuzhou high speed "mechanical hand" card, high speed manipulator will be gradually popularized

Your current location: Home >> News >> Industry news

Fuzhou high speed "mechanical hand" card, high speed manipulator will be gradually popularized

Release date:2017-08-21 Author: Click:

Fuzhou high speed "mechanical hand" card, high speed manipulator will be gradually popularized

Test operation at Jingxi toll station and airport high speed toll station, the card is passed directly to the window

Drive through the highway toll card issuing machine, too close to the fear scratched car, and not near enough to reach the card, so many opportunities for our solution under the seat belt, stretched out his hand to take the card. But this not only affects the speed of traffic, but also may be fined. For the convenience of the driver card, Fuzhou Fujian Expressway Management Branch in the province took the lead in the introduction of "manipulator" card. At present, the "mechanical hand" service card is run at the Jingxi toll station and the airport high speed toll station in Minhou. It is expected to be promoted gradually.

High speed manipulator


[reporter experience]

No need to unplug the seat belt to pull out the card "mechanical hand" channel more quickly

Yesterday morning, the reporter drove to the northwest city of Minhou Jingxi toll station, the entrance to the most right side of the self-service card machine added "mechanical hand." Reporters at the end of the card issuing machine button, out of shape as the arm "manipulator", put the card handed to reporters outside the window, the reporter took the card, easy car to leave the toll station.

The reporter saw in the other self issuing channels, and many drivers take time, to solve the safety belt, hand from the groove and then sat on the fee drawing fresh card, buckle up and leave the cab. As a result, parking solution, safety belt, card, buckle up and left, before and after less than half a minute.

In contrast, the "mechanical hand" channel is installed, and the speed of the vehicle is faster. In one minute, the "mechanical" hairpin can serve four or five cars, while the ordinary self-service card machine can only serve two or three cars.

[driver evaluation]

It's very helpful for novice

The reporter interviewed several drivers, almost all respondents are "manipulator" card machine praise, said this card is very convenient, especially for novice drivers.

"I hope that in the future more high-speed self-service channels can be equipped with 'mechanical hands'." Ms. Chen said the driver, she drove time soon, driving is not too familiar, each toll station card, card are very nervous, afraid to drive too close to the machine, to worry about the car to rub the concrete pier, but from a distance and worry is not to get the card, so only the first unlock safety belt, push open the door for take the card, take to the card and then sat back, buckle the safety belt to leave. Sometimes a chauffeur driver is more nervous than a trumpet in the back.

Ms. Chen said that every time she drove through the Jingxi toll station, she would take the "mechanic" hairpin.

High speed manipulator


[high speed company]

After the trial operation is stable, it will be promoted gradually

Li, vice manager of Fujian Expressway Fuzhou Management Branch, introduced in October and March this year, they introduced "mechanical hand" card issuing at Jingxi toll station and airport toll station, and handed the pass card directly to the driver through the humanoid delivery card action.

The director of the monitoring department of the company introduces that the "manipulator" adopts the industry 4 technology, through the forearm and rear arm coordination, takes the card out of the hairpin machine bayonet, and extends the "hand" to pass the card to the driver. Compared with the ordinary card machine, "manipulator" to get more humane, to shorten the distance of nearly 20 cm. "Robot" can also take turns from a card issuing machine two bayonet pass card, very flexible, making full use of double bayonet technology, improve the reliability and capacity of card issuing machine, to test run stability, will be gradually extended.

This article URL:http://en.toolcen.com/news/345.html

Related tags:Highspeedmanipulator

最近浏览:

Share
Welcome to leave a message
Please enter a message here, we will contact you as soon as possible.
Name
Contact
Phone
Phone
Mailbox
Mailbox
Address
Address