Shenzhen Tongcheng automation equipment Co., Ltd.
Q Q : 443231019
Phone : 0755-33199429
Mailbox : firstname.lastname@example.org
Web site: www.toolcen.com
Factory address: Shenzhen Baoan District Shiyan Street Bay Village Yue Chang Industrial Park
Office address : room 13, 12 floor, 232 stone East Road, Shiyan street, Baoan District, Shenzhen
How much do you know about the features and functions of the high speed manipulator?
Double sectional type arm high speed manipulator with high rigiditylinear and Aluminum Alloy tectonic belt speed beam, organizing special planning, symbol of upper and lower arm of the structure height is shortened, the upper and lower cylinders, just half of the stroke to reach full stroke. In addition to adding up and down speed and stability, it can also cooperate with a workshop with a low height.
The function of the high speed manipulator:
The electric remote control adjustment is used to draw azimuth and stroke, so as to save the safety of the operation at the time of adjustment.
Up and down electric adjustment travel: up and down stroke electric remote control adjustment, save the time to add operation safety.
Horizontal axis digital control: digital setting crosswise travel, can be multi point and follow up products, the maximum can be put 99 points. Used for placing products.
Transverse servo motor drive: transverse axiscanuse AC servo motor drive, and the precision of planetary gear reducer with gear rack drive, fast accurate positioning;
positioning accuracy reaches for 0.1mm. It can be applied to the precise removal of the location.
The upper and lower axle servo motor drives: the upper and lower axle of the product is driven by the AC servo motor, and it can move quickly, save the time in the mold, increase the efficiency, and set different height of the object outside the mold. The positioning accuracy is 0.2mm.
Spout group: can set a few mold spray / each spray how long / nozzle can be installed on the arm or mold, the maximum can be set two groups.
Medium plate inspection: in the three plate mold, admit the middle plate position, prevent the arm from hitting the mold.
Products: products placed in photoelectric inspection conveyer belt products to prevent collision.
Installation of air pressure shear: can be installed in the arm or transverse end cropper.
European Union Joint: the EUROMAP12 standard joint can be equipped with the ejector.
Low speed downlink of the outside of the mold: to prevent the crash operator.
Padding: transverse axis digital control, servo motor drive, upper and lower transverse axis servo motor drive three to buy only one of three functions.